IN-1000 Infant incubator

Standard Composition
1. Servo Control Mode: air temp;
2. Instant Parameter Displaying: set temp, air temp and heat power rate;
3. Audible & Visual Alarms: power failure, sensor failure, higher & lower temp, air temp override, fan failure, system failure;
4. >37℃ Preset Mode: power failure reset memory, alarm silence, keypad lock, self-test function;
5. Hood with dual slope: 6 hand-ports; left & right cabinets, top-shelf;
6. RS-232 Output Connector (Use for network system)


Specification
Power ：Model IN-1000-1E （110 / 120 V ac, 50Hz / 60Hz）；
Model IN-1000-2E （220 / 240 V ac, 50Hz / 60Hz）；
Power Input （≤400VA）；
Refer to IEC60601-1, this equipment belongs to ClassI, Type BF
Its operation is continuous；

Alarm ：

Power Alarm ：Power Failure: Activates if primary power to the Incubator fails or the power wire is accidentally disconnected from the wall receptacle；

Fan Alarm ： Fan Failure: Activates if Fan motor malfunctions；

Sensor Alarm ：Air Sensor Failure: Air Sensor malfunction, refer unit to service；

Deviation Alarm ：High Air Temperature: Activated if displayed Air Temperature is 15°C above set point；

Low Air Temperature: Activated if displayed Air Temperature is 25°C below set point；

Over Temperature Alarm ：Over Air Temperature: Activated when displayed Air Temperature was approach 38°C for set temperature ≤37°C, or approach 40°C for set temperature >37°C in Air Mode；
System Alarm： System Failure: Activated if Temperature Control System malfunctions；

Temperature Control Range and Correlative Specifications ：

Air Temperature ：20°C~37°C,for set temperature ≤37°C, 37°C~39°C, for set temperature >37°C；

Temperature Rise Time ：≤30min；
Temperature Variability ：±0.5°C；
Temperature Uniformity： ≤1°C；

Environment Requirement ：

Environment Temperature： Operation Temperature Range +20°C~+30°C；Store Temperature Range -40°C~+55°C；

Environment Humidity: Operation Humidity Range 30%~75%;Store Humidity Range 10%~100%;
Atmospheric Pressure Range :700hPa~1060hPa;

Other Specifications ：

Noise Level Within Hood Environment :≤55dB(Environment noise below 45dB);

Carbon Dioxide (CO2) Level within the Hood Less than 0.5% when a mixture of CO2 in air is delivered at 750ml/min at a point 10cm above the center of the mattress;
Air Velocity Over Mattress less than 0.3m/s;
Infant Bed Max Load 10kg;
Transfusion Shelf Max Load 2kg;
Cabinet Max Load 6kg;

Function of "SILENCE" Key ：

Make the alarm to be silence for 10 minutes by press this key :Deviation Alarm；Sensor Alarm；Fan Alarm；

Factory Default Settings ：

Temperature Control Mode Air Temperature Mode;Air Set Temperature: 32°C;Temperature Units:°C